15W PLL FM transmitter with 88-108MHz coverage, dual tuning step (100kHz/1MHz), BNC connector, and 3.5mm audio & microphone inputs. 12V DC powered — ideal for mobile, temporary, and small-scale fixed installations.
Buy NowThe CZE-15A is a compact 15W PLL FM broadcast transmitter covering the full 88-108MHz FM band. It features dual tuning step selection (100kHz fine / 1MHz fast) for quick frequency changes, a BNC antenna connector, and both 3.5mm audio line-in and microphone inputs for flexible audio sourcing. Powered by standard 12V DC, it is suitable for mobile broadcasting, drive-in theaters, campus radio, and temporary event setups.
Featuring PLL frequency-locked loop technology, the CZE-15A delivers exceptional frequency stability of ±0ppm across a wide temperature range of -10°C to +50°C. The harmonic suppression of ≤ -60dB ensures clean transmission with minimal interference to adjacent channels.
The transmitter provides both 3.5mm audio line input and a dedicated microphone input, making it suitable for both pre-recorded content and live voice broadcasting. The BNC-type antenna connector and standard 50 Ohm impedance ensure compatibility with a wide range of FM broadcast antennas.
Powered by a standard 12V DC supply (4A minimum recommended), the CZE-15A is compact, portable, and easy to deploy. For best results, pair it with a properly tuned FM broadcast antenna — the transmission range will vary based on antenna quality, terrain, receiver sensitivity, and environmental obstructions.
Important: Never power on the transmitter without an antenna connected, as this may damage the RF output stage.
| Frequency Range | 88MHz ~ 108MHz |
|---|---|
| Tuning Step | 100kHz / 1MHz |
| Output Power | 15 Watts |
| Frequency Stability | ±0ppm (-10°C ~ +50°C) |
| Ripple / Harmonic Waves | ≤ -60dB |
| Modulation Frequency Error | ≤ 75KHz (100%) |
| Frequency Response | 100 ~ 15000Hz |
| Antenna Connector | BNC type |
| Output Impedance | 50 Ohm |
| Audio Input Connector | 3.5mm headphone connector |
| MIC Input Connector | 3.5mm headphone connector |
| Power Supply | 12V DC (current load ≥ 4A) |