CAMEL RF

This stereo FM transmitter can easily build a wonderful FM radio station. This one have a beautiful aluminum alloy cover(Color: Gray).

Specification: 

　　 1, uses:This product is the factory, OEM, schools, individuals, car FM radio, the ideal district FM radio broadcasting equipment.

　　 2, performance characteristics:

• The use of high-quality aluminum production, and a less-PA after the 2SC1971 cooling plate, four digital display of frequency.
• Japan ROHM motherboard for the next-generation integrated NC FM stereo radio chip PLL BH1415F, built-in PLL frequency PLL, audio pre-emphasis, limiter and low pass filter circuit. Make sound more sweet.
• AT89C2051 and the control board by the AT24C02 composition; After the two-2SC3355, a 2SC2053 C1971 and a total of four power amplifier output after.
• Overall shielding good, compact structure, small size, appearance generous.

　　 3, main technical parameters:

Frequency range: 88MHz ~ 108 MHzTuning Step: 100kHz /1Mhz

Transmit Power: 5 watts

Stability of Frequency: ±0ppm（-10℃~+50℃）

Ripple or harmonic waves: <= -60dB

Modulate Frequency error:<=75KHz（100%）

Freq. Response: 100~15000Hz

Antenna Connector: BNC type

Output Impedance: 50 ohm

Audio Input Connector: 3.5mm headphone connector

Power Supply: 12V DC (The current load of power supply should over 2A)

If you can match a good antenna to the FM transmitter, the effect will be better.The transmission range depends on many factors. The true distance is based on the sensitivity of the receiver, antenna of the receiver, and the building and other obstructions, which are between the transmitter and receiver. And the distance will much more in countryside.

ATTENTION: Never power on the transmitter when an antenna is not connected!!!

5Watt FM transmitter instruction manual(english)

Downloaded a total of 327 times

If you buy a large number of products, please contact us.