CAMEL RF

——————————————————————————–

Buy it Now   Item:58 USD   Shipping to worldwide:35 USD

Package included:

• 500mW Transmitter[silver] x1
• Antenna x1
• 12V DC power adaptor(110-240 volt)  x1
• 3.5mm stereo audio interlink cable  x1

——————————————————————————–

This stereo FM transmitter can easily build a wonderful FM radio station. This one have a beautiful aluminum alloy cover(Color: Gray).

Specification:

1, uses:This product is the factory, OEM, schools, individuals, car FM radio, the ideal district FM radio broadcasting equipment.

2, performance characteristics:

• Complete machine produced using high-quality aluminum alloy, blue backlit LCD display frequency.

• Japan ROHM motherboard for the next-generation integrated NC FM stereo radio chip PLL BH1415F, built-in PLL frequency PLL, audio pre-emphasis, limiter and low pass filter circuit. Make sound more sweet.
• AT89C2051 and the control board by the AT24C02 composition; After the 2sc9018, 2SC3355,2sc2053 and a total of 3 power amplifier output after.
• Overall shielding good, compact structure, small size, appearance generous.

500mW FM Transmitter

[not include The Card]

[not include The Bear]

Parameters:

Quick Start Set-up Instructions

1. Connect your audio source to the Stereo FM Transmitter via one of the supplied audio cables (either the Stereo Headphone Jack or Stereo RCA jack)
2. Select an unused FM station in your area (The station can be totally static or with some bleed over on it. The Stereo FM Transmitter should have no problem "walking over a radio station’s bleed over)
3. Set the Stereo FM Transmitter to that unused FM station (use the control panel buttons, frequency step: 100 khz)
4. To begin broadcasting turn on the Stereo FM Transmitter by pressing down the switch on the front of the unit.
5. Adjust any FM Radio to the signal that your are broadcasting on.
6. Listen and Enjoy, It’s just that easy!

Interesting Facts & Tips

• The FM Transmitter will not drift between stations because of our advanced stereo PLL Digital Tuner Technology.
• The FM Transmitter use the control panel buttons to control the frequency that it broadcasts on so if the power is lost and then restored it will begin broadcasting back on that exact same frequency. This avoids any need to reset the FM Transmitter back to the frequency you originally wanted.
• We use a switch to turn the transmitter on and off. This allows the transmitter to automatically turn back if power were to be lost and then restored.
• The FM Transmitter is designed to operate non-stop 24/7.
• The higher you place the antenna the farther you will transmit.
• Complete easy to follow plug & play instructions are included plus tips on getting the best distance possible.

If you can match a good antenna to the FM transmitter, the effect will be better.The transmission range depends on many factors. The true distance is based on the sensitivity of the receiver, antenna of the receiver, and the building and other obstructions, which are between the transmitter and receiver. And the distance will much more in countryside.

ATTENTION: Never power on the transmitter when an antenna is not connected!!!

——————————————————————————–

Buy it Now   Item:58 USD   Shipping to worldwide:35 USD

Package included:

• 500mW Transmitter[silver] x1
• Antenna x1
• 12V DC power adaptor(110-240 volt)  x1
• 3.5mm stereo audio interlink cable  x1

——————————————————————————–

If you buy a large number of products, please contact us.